Summary of session 3 on synchrotron radiation and beam dynamics

Below we summarize presentations, discussions and general conclusions of the Workshop session on "Beam Dynamics Issues". Major subjects include effects due to synchrotron radiation (SR), cryogenic loads, electron cloud, impedances, intra-beam scattering (IBS) and beam-beam interactions.Comment: 2 pp. EuCARD HE-LHC10 AccNet mini-workshop on a High-Energy LHC, 14-16 Oct 2010: Villa Bighi, Malt

Transverse Instabilities of Coasting Beams with Space Charge

Transverse beam stability is strongly affected by the beam space charge. Usually it is analyzed with the rigid-beam model. However this model is only valid when a bare (not affected by the space charge) tune spread is small compared to the space charge tune shift. This condition specifies a relatively small area of parameters which, however, is the most interesting for practical applications. The Landau damping rate and the beam Schottky spectra are computed assuming that validity condition is satisfied. The results are applied to a round Gaussian beam. The stability thresholds are described by simple fits for the cases of chromatic and octupole tune spreads.Comment: 6 pages, 2 figures, accepted by Phys. Rev. ST - Accel. Beam

Chromaticity dependence of the transverse effective impedance in the CERN Proton Synchrotron

The current knowledge of the transverse beam coupling impedance of the CERN Proton Synchrotron (PS) has been established with beam-based measurements at different energies. The transverse coherent tune shift as a function of the beam intensity has been measured in order to evaluate the total effective imaginary part of the transverse impedance in the accelerator at the energies of 7, 13 and 25 GeV. Measurements have been performed changing the vertical chromaticity for each vertical tune scan with intensity. The data analysis revealed an increase of impedance with chromaticity for all the considered energies. The transverse impedance can be compared with the previously evaluated theoretical impedance budget taking into account the individual contribution of several machine devices

Baseline LHC machine parameters and configuration of the 2015 proton run

This paper shows the baseline LHC machine parameters for the 2015 start-up. Many systems have been upgraded during LS1 and in 2015 the LHC will operate at a higher energy than before and with a tighter filling scheme. Therefore, the 2015 commissioning phase risks to be less smooth than in 2012. The proposed starting configuration puts the focus on feasibility rather than peak performance and includes margins for operational uncertainties. Instead, once beam experience and a better machine knowledge has been obtained, a push in $\beta^*$ and performance can be envisaged. In this paper, the focus is on collimation settings and reach in $\beta^*$---other parameters are covered in greater depth by other papers in these proceedings.Comment: submitted for publication in a CERN yellow report (Proceedings of the LHC Performance Workshop - Chamonix 2014

The UA9 experimental layout

The UA9 experimental equipment was installed in the CERN-SPS in March '09 with the aim of investigating crystal assisted collimation in coasting mode. Its basic layout comprises silicon bent crystals acting as primary collimators mounted inside two vacuum vessels. A movable 60 cm long block of tungsten located downstream at about 90 degrees phase advance intercepts the deflected beam. Scintillators, Gas Electron Multiplier chambers and other beam loss monitors measure nuclear loss rates induced by the interaction of the beam halo in the crystal. Roman pots are installed in the path of the deflected particles and are equipped with a Medipix detector to reconstruct the transverse distribution of the impinging beam. Finally UA9 takes advantage of an LHC-collimator prototype installed close to the Roman pot to help in setting the beam conditions and to analyze the efficiency to deflect the beam. This paper describes in details the hardware installed to study the crystal collimation during 2010.Comment: 15pages, 11 figure, submitted to JINS

Status of LHC Crab Cavity simulations and beam studies

The LHC crab cavity program is advancing rapidly towards a first prototype which is anticipated to be tested during the early stages of the LHC phase I upgrade and commissioning. The general project status and some aspects related to crab optics, collimation, aperture constraints, impedances, noise effects, beam transparency and machine protection critical for a safe and robust operation of LHC beams with crab cavities are addressed here

Observation of focusing of 400 GeV/c proton beam with the help of bent crystals

The results of observation and studies of focusing of 400 GeV/ c proton beam with the help of bent single crystals are presented. Two silicon crystals have been used in the measurements. The focal length of the first and second crystals is found to be 1.48 m and 0.68 m, respectively. The mean square size of the horizontal profile in the focus was 3.1 and 4.3 times as small as at the exit of the crystals

A Massive Open Online Course on Particle Accelerators

International audienceThe TIARA (Test Infrastructure and Accelerator Research Area) project funded by the European Union 7th framework programme made a survey of provision of education and training in accelerator science in Europe. This survey highlighted the need for more training opportunities targeting undergraduate-level students. This need is now being addressed by the European Union H2020 project ARIES (Accelerator Research and Innovation for European Science and Society) via the preparation of a Massive Online Open Course (MOOC) on particle accelerator science and engineering. We present here the current status of this project, the main elements of the syllabus, how it will be delivered, and the schedule for providing the course